Welcome to the Warner Instruments Knowledge Base
Please look around
We've structured this KB to mirror our product website.
However, if you can't find your answer, then please submit a question and we'll respond directly to you.
|
 Search the Knowledgebase |
 Browse by Category |
|
|
|
| View Questions by Category |
|
|
Perfusion Accessories
|
|
Syringes, valves, manifolds, timers, parts
|
|
There were 8 questions found in this category:
 Can the syringes warmers (e.g. the SW-60) still do the job when using constant flow syringes?
The SW syringe warmers will heat DN-Series syringes but not as quickly as with a regular syringe. Recall that the DN-Series syringes have two syringes, each holding solution. While these two solutions are connected it will take some time for heat to communicate into the inner syringe Many resea ...
- How do I block manifold input ports that are not in use?
Some multi-port manifolds come supplied with 'plugs' for the unused ports.The best way to plug an unused port in a manifold not supplied with a plug is to cut an appropriate sized tubing into a10 mm section and to plug one end of the tube, allowing the other end to slide over or into the open po ...
- What comes with the RS-1 "support stand"?
The support stand is comprised of a steel base with a threaded rod that screws into the base. No other components are included.
- What is the difference between 1,2,3 and 4 way stopcocks?
1 Way Stopcock with two ports, "closed" or "open" position only.2 Way Stopcock with 3 ports and 2 positions. This stopcock has a long arm with 90° rotation. 2 Way Animation3 Way Stopcock with 3 ports, a long arm handle of 180° rotation. Not allowing an "all open position". 3 Way Anima ...
- What is the internal or 'dead' volume of the ML manifolds?
10-12 ul (microliters)
- What size PE tubing is used with the ML, MM, MP and MPP series manifolds?
Manifold Series Input Port Output port ML PE-50 PE-50 MM PE-50 PE-10 MP PE-160 PE-160 MPP PE-160 PE-160
- What tubing fits on thto the FR-50/FR-55S?
The FR-50 and FR-55S are designed to accept PE-160 tubing onto the stainless steel shafts. Fortunately, PE-90 inserts directly into PE-160 so you can accommodate the smaller tubing if necessary.
- Don't see your answer? Please submit a question!
We welcome your questions! Submit a question to us (via email) by clicking here and we'll answer you directly. We'll also anonymously post your question to our FAQ Knowledge Base (KB) to assist other people.If you choose to not communicate via this KB, then please send your questions directly to ...
|
|
